The receivers (G2, G2S and G3)
The product family includes a choice of different types of receivers which correspond to the application task (G2, G2S and G3).
The receiver units are designed, manufactured, and tested to withstand extreme environmental conditions such as shock, vibration, electromagnetic disturbances and they are sealed and moulded against dust, damp, moisture and water.
The receiver’s powerful PLC is supplied and prepared for 2-way direction communication, signal handling of for example, speed-, ramp-, blocking-, hold-, overload functions, the field bus CAN-BUS etc. Programming can occur without tools (on-line programming) or via a PC.
The receiver’s software (application software) can be re-configured, which makes them flexible when customizing solution for the end-user.
The receiver (G2) have 8 proportional functions (voltage, PWM, current, protocol-controlled), 12 output signals, 3 input signals.
The receiver (G2S) can be expanded or the functions can be customized for specific tasks (f. ex. when the G2-receiver is insufficient).
G3 is used for serial communication (for example with: the field bus CANBUS). Other customer adapted interfaces or protocols can be provided on request.
The G3-receiver: The number of outputs are limited by the portable control units.
Provides the opportunity to replace earlier receiver models from Scanreco.
The recommended control units are: MINI, MAXI, or HANDY.
Safety
Each radio remote control system functions in all manner of operational conditions equipped with their own unique identity code (ID-code). This means that only the correct control unit can activate and control its matching receiver (crane/machine). For maximum safety the receiver has double processors to enable comparison and checking of the data signals from the control unit. The receiver on the crane operates with a so-called automatic emergency stop, i.e., dump-valve and all of the crane movements are only activated as long as the verified data signals are received from the actual portable control unit. The stop function is in accordance with EN13849:2008 cat. 3, PL=e
Approvals
Scanreco’s radio remote control system meets the EU’s Machine- and EMC-directive (CE-mark) and is approved and complies with the special demands and standards for “Remote controlled lifting devices” in accordance with 2006/42/EC, EN13849:2008, EN301489-3, EN300 220-3, EN60950-1, EN61000, EN55011 and R&TTE 1999/5/EC. The radio unit is also certified in several countries outside of Europe. Scanreco is additionally certified in accordance with EN ISO9001-2008.
For more information and availibility about the RECEIVER series, please contact Scanreco.
Disclaimer: All rights reserved. Design, equipment, technichal data, information and specification are subject to change or improvement without prior notice.