The Control Unit MINI
The units can be equipped with manouvering levers or joysticks.
The control units have a stop function to immediately halt all of the crane/machine’s movement and functions.
The control units can be equipped with a large number of toggle switches and levers for functions such as the starting and stopping of the vehicle motor, a sound signal, an automatic throttle control when rising and changing the flow of concrete pouring etc. All control levers and toggle switches offer an excellent touch and are of high quality.The crane/machine’s operational speed remains in direct proportion to the manoeuvre lever’s displacement.
The radio transmitter and its antenna are built-in. A LED and sound signal indicate, among other things, the operational and battery status and offer the possibility of carrying out easy failure detection.
The Micro operation is standardized, i.e. reduces the speed to five steps, for example, 60%, 50%, 40%, 30 % and 20% of the crane’s normal speed.
The battery is located in the control unit and can be easily replaced.
The control unit can also be provided with light emitting diodes and/or graphic display for indication and reading from the crane/machine.
The radio remote control can be used in combination with all of the hydraulic valves currently available on the market.
Safety
Each radio remote control system functions in all manner of operational conditions equipped with their own unique identity code (ID-code). This means that only the correct control unit can activate and control its matching receiver (crane/machine). For maximum safety the receiver has double processors to enable comparison and checking of the data signals from the control unit. The receiver on the crane operates with a so-called automatic emergency stop, i.e., dump-valve and all of the crane movements are only activated as long as the verified data signals are received from the actual portable control unit. The stop function is in accordance with EN13849:2008 cat. 3, PL=e
Approvals
Scanreco’s radio remote control system meets the EU’s Machine- and EMC-directive (CE-mark) and is approved and complies with the special demands and standards for “Remote controlled lifting devices” in accordance with 2006/42/EC, EN13849:2008, EN301489-3, EN300 220-3, EN60950-1, EN61000, EN55011 and R&TTE 1999/5/EC. The radio unit is also certified in several countries outside of Europe. Scanreco is additionally certified in accordance with EN ISO9001-2008.
For more information and availibility about the MINI series, please contact Scanreco.
Disclaimer: All rights reserved. Design, equipment, technichal data, information and specification are subject to change or improvement without prior notice.